Д-р Александра Бужаровска, редовен професор
10.01.2024 2024-03-07 19:49Д-р Александра Бужаровска, редовен професор
Д-р Александра Бужаровска, редовен професор
Институт: Органска технологија
email: abuzar@tmf.ukim.edu.mk
тел: 02 3088 207
Доктор на технички науки, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје, 2003.
Магистер на технички науки, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје,1994.
Специјалист по полимерни материјали, Универзитетот во Ферара,Италија,1993.
Дипломиран инженер технолог, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје, 1989.
2013 редовен професор на Технолошко-металуршки факултет, УКИМ
2008 вонреден професор на Технолошко-металуршки факултет, УКИМ
2003 доцент на Технолошко-металуршки факултет, УКИМ
1994 асистент на Технолошко-металуршки факултет, УКИМ
1989 помлад асистет на Технолошко-металуршки факултет УКИМ
Department of Science and Engineering of Oxide Materials and Nanomaterials, Polytechnic University of Bucharest, Romania, May 2017.
ICPEES/ECPM, Univerity of Strasbourg, France, December 2016.
Department of Chemistry, University of Bologna, Italy, October-November 2014.
Institute of Research on Polymer Technology, Naples, Italy, June-July 2005.
Department for Physical Chemistry and Electrochemistry,University of Dresden, Germany, January-February 2000.
Department of Chemistry, University of Naples Federico II, Italy, May-June 1996.
Institute of Research on Polymer Technology, Arco Felice, Naples, Italy, September 1992- April 1993.
1. Member of Europen Polymer Federation
2. Society of Chemists and Technologists of Macedonia
3. Society of Chemical Industry, UK
Reviwer
1. Polymer International
2. Journal of Applied Polymer Science
3. Journal of Material Science
4. Journal of Thermal Analysis
5. Composites A
6. Journal of Reinforced Plastics and Composites
7. Phosphorus, Sulfur, and Silicon and the Related Elements
1. Методи на испитување на органски соединенија
2. Карактеризација на материјалите
3. Композити и нанокомпозити
3. Биоразградливи полимерни материјали
1.Инструментални техники и методи за анализа на примероци од животната средина
2.Одбрани инструментални методи за карактеризација на влакно
1. A. Buzarovska, Bio-nanocomposites of biodegradable polymers and inorganic fillers, CCTM 2010, XXI Congress of Chemists and Technologists of Macedonia, Ohrid, 23-26.09.2010
2. А.Бужаровска, Употреба на земјоделски ресурси во композитни материјали со биоразградливи полимери,работилница “Можности за примена на обновливи ресурси во композитни конструкциони материјали 1.2.2007, хотел Карпош Скопје (2007)
3. A.Buzarovska, Production and Polymer Processing in Republic of Macedonia; Research in the field, Conference on Polymeric Materials and Additives, p. 12. November 17-18, Zagreb, Croatia (2005)
4. A.Buzarovska and Lj.Arsov, Synthesis and Characterization of polythiophene copolymers, 17th Congress of Chemists and Technologists of Macedonia, 18-20 April, 2002
5. М. Цветковска, А.Бужаровска, С.Ќосева, Е.Хамурку, Е.Јилдиз, Синтеза на PS-PDMS-PS блок кополимери по различни постапки,Прво Советување за полимери и полимерни материјали, Скопје 26-28 Октомври 1995
6. А.Бужаровска, С.Ќосева, Мешливост, фазни односи и морфологија мешавине атактичног поли(метилметакрилата)/поли(дициклохексил итаконата, XXXVI Саветовање српског хемиског друштва, Белград, 1-3.06-1994
8. Aleksandra Bužarovska, Sorina Dinescu, Andreea D.Lazar, Mirela Serban, Gratiela G.Pircalabioru, Marieta Costache, Chiara Gualandi, Luc Avérous, Nanocomposite foams based on flexible biobased thermoplastic polyurethane and ZnO nanoparticles as potential wound dressing materials. Materials Science and Engineering: C, Volume 104, 109893 (2019)
9. Aleksandra Buzarovska, Sorina Dinescu, Leona Chitoiu, Marieta Costache, Porous poly(l-lactic acid) nanocomposite scaffolds with functionalized TiO2 nanoparticles: properties, cytocompatibility and drug release capability.Journal of Materials Science, 53, 16, 11151-11166 (2018)
10. P. Karamanolevski, A. Buzarovska, G.Bogoeva-Gaceva, The effect of Curing Agents on Basic properties of Silicone-epoxy Hybrid resin. Silicon, 10, 6, 2915–2925 (2018)
11. A.Buzarovska, Preparation and characterization of poly(ε-caprolactone)/ZnO foams for tissue engineering applications. Journal of Materials Science, 52, 20, 12067–12078 (2017)
12. A.Buzarovska, G.Bogoeva-Gaceva, R.Fajgar, Effect of the talc filler on structural, water vapor barrier and mechanical properties of poly(lactic acid) composites. Journal of Polymer Engineering, 36, 2, 181-188 (2016)
13. A. Buzarovska, V. Stefov, M. Najdoski, G. Bogoeva-Gaceva, Thermal analysis of multi-walled carbon nanotubes material obtained by catalytic pyrolysis of polyethylene. Macedonian Journal of Chemistry and Chemical Engineering, 34, 2, 373-379 (2015)
14. A. Buzarovska, C.Gualandi, A.Parrilli, M. Scandola, Effect of TiO2 nanoparticle loading on Poly(L-lactic acid) porous scaffolds fabricated by TIPS. Journal of Composites B, 81,189-195 (2015)
15. A. Ivanoska Dacik, A. Buzarovska, G. Bogoeva Gaceva, Clay Improved dispersion of carbon nanotubes in different solvents. Contributions, Section of Natural, Mathematical and Biotechnical Sciences, MASA, 36, 1, 5-10 (2015)
16. V. Stefov, M. Najdoski, G. Bogoeva-Gaceva and A. Buzarovska, Properties assessment of multiwalled carbon nanotubes. A comparative study. Synthetic Metals, 197, 159-167 (2014)
17. A. Ivanoska Dacik, G. Bogoeva Gaceva, A. Buzarovska, L. Raka, I. Gjorgiev Preparation and properties of natural rubber/organomontmorillonite; from lab samples to bulk materials. Macedonian Journal of Chemistry and Chemical Engineering, 33, 2, 249-265 (2014)
18. G.Bogoeva-Gaceva, A.Buzarovska, Rapid method for evaluation of cure kinetics of thermosetting polymers. Macedonian Journal of Chemistry and Chemical Engineering, 32, 337-344 (2013
19. A. Buzarovska, PLA nanocomposites with functionalized TiO2 nanoparticles. Polymer-Plastics Technology and Engineering, 52, 3, 280-286 (2013)
20. A. Buzarovska, A.Grozdanov, BiodegradablePoly(L-lactic acid) /TiO2 nanocomposites: Thermal properties and degradation. Journal of Applied Polymer Science, 123, 2187-2193 (2012)
21. A.Grozdanov, A.Buzarovska, M.Avella, M.Errico, G.Gentile, PCL/MWCNT Nanocomposites as nanosensors, Nato Science for Peace and Security Series-B: Physics and Biophysics, Chapter 15, 149-154 (2011)
22. A. Grozdanov, M.Avella, A.Buzarovska, G.Gentile, M.Errico, Reuse of Natural reinforced eco-composites in polymer mortars. Polymer Engineering and Science, 50, 4, 762-766 (2010)
23. M.Avella, M.E.Errico, G.Gentile, A.Buzarovska, A.Grozdanov, Chapter 13: Green composites based on biodegradable polymer matrices. ENVIRONMETALLY DEGRADABLE MATERIALS BASED ON MULTICOMPONENT POLYMERIC SYSTEMS, Ed. by Cornelie Vasile and Gennady E.Zaikov, Koninklijke Brill NV. Leiden, The Netherlands (2009)
24. M. Avella, A. Buzarovska, M.Errico, G.Gentile, A.Grozdanov, Eco-Challenges of Bio-Based Polymer Composites. Materials, 2, 911-925 (2009)
25. A. Buzarovska, A. Grozdanov, M.Avella, G.Gentile, M.Errico, Poly(hydroxybutyrate-co-hydroxyvalerate)/ Titanium Dioxide Nanocomposites: A Degradation Study. Journal of Appled Polymer Science, 114, 5, 3118-3124 (2009)
26. A. Buzarovska, A.Grozdanov, Crystallization kinetics of poly(hydroxybutyrate-co-hydroxyvalerate) and poly(dicyclohexylitaconate) PHBV/PDCHI blends: thermal properties and hydrolytic degradation. Journal of Material Science, 44, 1844-1850 (2009)
27. G.Bogoeva-Gaceva, A. Buzarovska, B. Dimzovski, Discoloration of Synthetic Dyeing Wastewater using Polyaluminium Chloride. G.U. Journal of Science, 21, 4, 123-128 (2008)
28. M.Avella, G. Bogoeva-Gaceva, A. Buzarovska, M.Errico, G.Gentile, A. Grozdanov, Poly(lactic acid)-based biocomposites with kenaf fibers. Journal of Applied Polymer Science, 108, 6, 3542-3551 (2008)
29. A.Buzarovska, G.Bogoeva-Gaceva, A. Grozdanov, M.Avella, G.Gentile, M. Errico, Potential use of rice straw as filler in eco-composite materials. Australian Journal of Crop Science, 1(2), 37-42 (2008)
30. A.Buzarovska, G.Bogoeva-Gaceva, A.Grozdanov, M.Avella, G.Gentile, M.Errico, Crystallization behavior of poly(hydroxybytyrate-co-valerate) in model and bulk PHBV/kenaf fiber composites. Journal of Material Science, 42, 6501-6509 (2007)
31. M.Avella, G.Bogoeva-Gaceva, A.Buzarovska, M.Errico, G.Gentile, A.Grozdanov, Poly(3-hydrohybutyrate-co-3-hydrohyvalerate) based biocomposites reinforced with kenaf fibres. Journal of Applied Polymer Science, 104, 5, 3192-3200 (2007)
32. A.Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, M.Avella, M.Errico, G. Gentile, Nonisothermal crystallization kinetics of kenaf fiber/polypropylene composites. Polymer Engineering Science, 47, 5, 745-749 (2007)
33. G.Bogoeva-Gaceva, M. Avella, M.Malinconico, A.Buzarovska, A.Grozdanov, G.Gentile, M.E. Errico Natural Fiber Eco-Composites. Polymer Composites, 28, 1, 98-107 (2007)
34. A.Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, M.Avella, M.Errico, G. Gentile, Rice straw as an alternative reinforcement in polypropylene composites. Agronomy Sustainable Development, 26, 4, 251-255 (2006)
35. A.Buzarovska, G.Bogoeva-Gaceva, A.Grozdanov, M.Avella, Crystallization behavior of poly(hydroxybutyrate) in model composites with kenaf fibers. Journal of Applied Polymer Science, 102, 1, 804-809 (2006)
36. A. Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, E.Nedkov, Nonisothermal melting and crystallization of polypropylene in model composites: Kinetic analysis. Journal of Polymer Science B, 43, 1, 66-73 (2005)
37. A.Buzarovska, Lj.Arsov, Relaxation kinetics in thiophene/3-alkylthiophene random copolymers. Polymer International, 53, 11, 1866-1869 (2004)
38. A.Buzarovska, Lj.Arsov, Comparative study of the electrochemical response of poly(alkyl thiophene) derivatives deposited on platinum and titanium electrodes. Polymer Bulletin, 50, 161-168 (2003)
39. A.Buzarovska, Lj Arsov, N. Hebestreit and W.Plieth, Synthesis and characterization of thiophene/3-alkylthiophene random cooligomers, Journal of Solid State Electrochemistry, 7, 49-54 (2002)
40. A.Buzarovska, Lj.Arsov, Relaxation process at conductive poly(thiophene) and its poly(alkyl) derivatives: Kinetics of electrochemical doping. Polymer Bulletin, 48, 99-104 (2002)
41. A. Buzarovska, S. Koseva, M.Cvetkovska, E.Nedkov, Phase transitions of poly(ethylene oxide)-poly(dicyclohexyl itaconate) block copolymers. Bulletin of the Chemists and Technologist of Macedonia, 20, 2, 111-119 (2001)
42. K.Colancevska, V. Dimova, V. Kukurinov, D. Molnar, A.Buzarovska, Synthesis, antibacterial and antifungal activity of 4-substituted-5-aryl-1,2,4-triazoles. Molecules, 6, 815-824 (2001)
43. A.Buzarovska, I.Arsova, Lj. Arsov, Electrochemical synthesis of poly(2-methyl aniline): electrochemical and spectroscopic characterization. Journal of Serbian Chemical Society, 66, 1, 27-37 (2001)
44. A.Buzarovska, S.Koseva, M. Cvetkovska, E. Nedkov, Poly(ethylene oxide) blends with poly(ethylene oxide)/poly(dicyclohexyl itaconate) block copolymers. European Polymer Journal, 37, 141-149 (2001)
45. M.Cvetkovska, S. Koseva, A.Buzarovska, B.Baysal, B. Yasar, O. Yilmaz, I. Popovic, L Katsikas, ABA type block copolymers of poly(monobutylitaconate) and poly(monocyclohexylitaconate) with poly(dimethylsiloxane): Synthesis and characterization. Macromolecular Chemistry and Physics 201, 6, 685-693 (2000)
46. M. Cvetkovska S.Koseva, A.Buzarovska, M.Lazarevic, B.Baysal, E. Hamurcu, N.Uyanik, Characteriation of polystyrene/polydimethyl- siloxane /polystyrene block copolymers obtained by various preparation procedures. Bulletin of the Chemists and Technologist of Macedonia, 15, 1, 15-22 (1996)
47. C.Silvestre, S.Cimmino, E.Di Pace, E.Martuschelli, M.Monaco, A.Buzarovska, S.Koseva, Morphology and Crystallization of isotactic polypropylene/poly(dicyclohexylitaconate) blends, Polymer Networks and Blends, 6, 2, 73-80 (1996)
48. S.Cimmino, E.Di Pace, E.Martuschelli, C.Silvestre, A.Buzarovska, S.Koseva, Phase structure, morphology and crystallization of poly(ethyleneoxide)/poly(dicyclohexylitaconate) blends, Polymer Networks and Blends, 5, 2, 63-68 (1995)
1. NATO SPS G5772 Portable chargers for soldiers-THOR (16.9.2020-16.9.2023)
2. BIOCOMP3DPRINT-12-AUF Obtention par impression 3D de biomatériaux composites aux propriétés antibactériennes (1.3.2019-1.9.2020)
3. BIOCOMPMAT-05-AUF Composite materials based on polymers and ceramic particles, with applications in tissue engineering and controlled drug delivery (2016-2017)
4. COST TU1207 Next Generation Design Guidelines for Composites in Construction (2013-2017)
5. Нанокомпозити од биоразградливи полимери и керамички полнители, Билатерален проект со Р. Словенија(2010-2012), главен истражувач
6.Биоразградливи полимерни смеси, МОН (2006-2009), главен истажувач
7.Eco-houses based on eco-friendly polymer construction composite materials (FP6, INCO-CT-2004-509185, раководител, Гордана Богоева Гацева(2004-2007)
8.COST-P12 Кристализација на полимерите: интегрирање на експерименталните и теоретските пристапи (2004-2007)
9.Примена на природни влакна како зајакнувачи во еколошки композити,МОН, раководител Анита Грозданов (2006-2009)
англиски
Доктор на технички науки, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје, 2003.
Магистер на технички науки, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје,1994.
Специјалист по полимерни материјали, Универзитетот во Ферара,Италија,1993.
Дипломиран инженер технолог, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје, 1989.
2013 редовен професор на Технолошко-металуршки факултет, УКИМ
2008 вонреден професор на Технолошко-металуршки факултет, УКИМ
2003 доцент на Технолошко-металуршки факултет, УКИМ
1994 асистент на Технолошко-металуршки факултет, УКИМ
1989 помлад асистет на Технолошко-металуршки факултет УКИМ
Department of Science and Engineering of Oxide Materials and Nanomaterials, Polytechnic University of Bucharest, Romania, May 2017.
ICPEES/ECPM, Univerity of Strasbourg, France, December 2016.
Department of Chemistry, University of Bologna, Italy, October-November 2014.
Institute of Research on Polymer Technology, Naples, Italy, June-July 2005.
Department for Physical Chemistry and Electrochemistry,University of Dresden, Germany, January-February 2000.
Department of Chemistry, University of Naples Federico II, Italy, May-June 1996.
Institute of Research on Polymer Technology, Arco Felice, Naples, Italy, September 1992- April 1993.
1. Member of Europen Polymer Federation
2. Society of Chemists and Technologists of Macedonia
3. Society of Chemical Industry, UK
Reviwer
1. Polymer International
2. Journal of Applied Polymer Science
3. Journal of Material Science
4. Journal of Thermal Analysis
5. Composites A
6. Journal of Reinforced Plastics and Composites
7. Phosphorus, Sulfur, and Silicon and the Related Elements
1. Методи на испитување на органски соединенија
2. Карактеризација на материјалите
3. Композити и нанокомпозити
3. Биоразградливи полимерни материјали
1.Инструментални техники и методи за анализа на примероци од животната средина
2.Одбрани инструментални методи за карактеризација на влакно
1. A. Buzarovska, Bio-nanocomposites of biodegradable polymers and inorganic fillers, CCTM 2010, XXI Congress of Chemists and Technologists of Macedonia, Ohrid, 23-26.09.2010
2. А.Бужаровска, Употреба на земјоделски ресурси во композитни материјали со биоразградливи полимери,работилница “Можности за примена на обновливи ресурси во композитни конструкциони материјали 1.2.2007, хотел Карпош Скопје (2007)
3. A.Buzarovska, Production and Polymer Processing in Republic of Macedonia; Research in the field, Conference on Polymeric Materials and Additives, p. 12. November 17-18, Zagreb, Croatia (2005)
4. A.Buzarovska and Lj.Arsov, Synthesis and Characterization of polythiophene copolymers, 17th Congress of Chemists and Technologists of Macedonia, 18-20 April, 2002
5. М. Цветковска, А.Бужаровска, С.Ќосева, Е.Хамурку, Е.Јилдиз, Синтеза на PS-PDMS-PS блок кополимери по различни постапки,Прво Советување за полимери и полимерни материјали, Скопје 26-28 Октомври 1995
6. А.Бужаровска, С.Ќосева, Мешливост, фазни односи и морфологија мешавине атактичног поли(метилметакрилата)/поли(дициклохексил итаконата, XXXVI Саветовање српског хемиског друштва, Белград, 1-3.06-1994
1.E Stojchevska, P Makreski, M Zanoni, L Gasperini, G Selleri, D Fabiani, …
Polymers for Advanced Technologies 35 (2), e6333
2. M Kubin, P Makreski, M Zanoni, G Selleri, L Gasperini, D Fabiani, C Gualandi, A Bužarovska, Piezoelectric properties of PVDF-TrFE/BaTiO3 composite foams with different contents of TrFE units. Polymer Composites (2023)
3. E Stojchevska, R Popeski-Dimovski, Ž Kokolanski, C Gualandi, A Bužarovska,Effect of Particle Functionalization on Structural and Dielectric Properties of Flexible TPU/BaTiO3/MWCNTs Composite Films. Macromolecular Chemistry and Physics (2023)
4. A.Bužarovska, M. Kubin, P.Makreski, M. Zanoni, L.Gasperini, G. Selleri, D. Fabiani & C. Gualandi, PVDF/BaTiO3 composite foams with high content of β phase by thermally induced phase separation (TIPS). Journal of Polymer Research, 29, 272 (2022)
6. Aleksandra Bužarovska, Sorina Dinescu, Andreea D.Lazar, Mirela Serban, Gratiela G.Pircalabioru, Marieta Costache, Chiara Gualandi, Luc Avérous, Nanocomposite foams based on flexible biobased thermoplastic polyurethane and ZnO nanoparticles as potential wound dressing materials. Materials Science and Engineering: C, Volume 104, 109893 (2019)
7. Aleksandra Buzarovska, Sorina Dinescu, Leona Chitoiu, Marieta Costache, Porous poly(l-lactic acid) nanocomposite scaffolds with functionalized TiO2 nanoparticles: properties, cytocompatibility and drug release capability.Journal of Materials Science, 53, 16, 11151-11166 (2018)
8. P. Karamanolevski, A. Buzarovska, G.Bogoeva-Gaceva, The effect of Curing Agents on Basic properties of Silicone-epoxy Hybrid resin. Silicon, 10, 6, 2915–2925 (2018)
10. A.Buzarovska, G.Bogoeva-Gaceva, R.Fajgar, Effect of the talc filler on structural, water vapor barrier and mechanical properties of poly(lactic acid) composites. Journal of Polymer Engineering, 36, 2, 181-188 (2016)
11. A. Buzarovska, V. Stefov, M. Najdoski, G. Bogoeva-Gaceva, Thermal analysis of multi-walled carbon nanotubes material obtained by catalytic pyrolysis of polyethylene. Macedonian Journal of Chemistry and Chemical Engineering, 34, 2, 373-379 (2015)
12. A. Buzarovska, C.Gualandi, A.Parrilli, M. Scandola, Effect of TiO2 nanoparticle loading on Poly(L-lactic acid) porous scaffolds fabricated by TIPS. Journal of Composites B, 81,189-195 (2015)
13. A. Ivanoska Dacik, A. Buzarovska, G. Bogoeva Gaceva, Clay Improved dispersion of carbon nanotubes in different solvents. Contributions, Section of Natural, Mathematical and Biotechnical Sciences, MASA, 36, 1, 5-10 (2015)
14.V. Stefov, M. Najdoski, G. Bogoeva-Gaceva and A. Buzarovska, Properties assessment of multiwalled carbon nanotubes. A comparative study. Synthetic Metals, 197, 159-167 (2014)
15. A. Ivanoska Dacik, G. Bogoeva Gaceva, A. Buzarovska, L. Raka, I. Gjorgiev Preparation and properties of natural rubber/organomontmorillonite; from lab samples to bulk materials. Macedonian Journal of Chemistry and Chemical Engineering, 33, 2, 249-265 (2014)
16. G.Bogoeva-Gaceva, A.Buzarovska, Rapid method for evaluation of cure kinetics of thermosetting polymers. Macedonian Journal of Chemistry and Chemical Engineering, 32, 337-344 (2013
17. A. Buzarovska, PLA nanocomposites with functionalized TiO2 nanoparticles. Polymer-Plastics Technology and Engineering, 52, 3, 280-286 (2013)
18. A. Buzarovska, A.Grozdanov, BiodegradablePoly(L-lactic acid) /TiO2 nanocomposites: Thermal properties and degradation. Journal of Applied Polymer Science, 123, 2187-2193 (2012)
19. A.Grozdanov, A.Buzarovska, M.Avella, M.Errico, G.Gentile, PCL/MWCNT Nanocomposites as nanosensors, Nato Science for Peace and Security Series-B: Physics and Biophysics, Chapter 15, 149-154 (2011)
20. A. Grozdanov, M.Avella, A.Buzarovska, G.Gentile, M.Errico, Reuse of Natural reinforced eco-composites in polymer mortars. Polymer Engineering and Science, 50, 4, 762-766 (2010)
21. M.Avella, M.E.Errico, G.Gentile, A.Buzarovska, A.Grozdanov, Chapter 13: Green composites based on biodegradable polymer matrices. ENVIRONMETALLY DEGRADABLE MATERIALS BASED ON MULTICOMPONENT POLYMERIC SYSTEMS, Ed. by Cornelie Vasile and Gennady E.Zaikov, Koninklijke Brill NV. Leiden, The Netherlands (2009)
22. M. Avella, A. Buzarovska, M.Errico, G.Gentile, A.Grozdanov, Eco-Challenges of Bio-Based Polymer Composites. Materials, 2, 911-925 (2009)
23. A. Buzarovska, A. Grozdanov, M.Avella, G.Gentile, M.Errico, Poly(hydroxybutyrate-co-hydroxyvalerate)/ Titanium Dioxide Nanocomposites: A Degradation Study. Journal of Appled Polymer Science, 114, 5, 3118-3124 (2009)
24. A. Buzarovska, A.Grozdanov, Crystallization kinetics of poly(hydroxybutyrate-co-hydroxyvalerate) and poly(dicyclohexylitaconate) PHBV/PDCHI blends: thermal properties and hydrolytic degradation. Journal of Material Science, 44, 1844-1850 (2009)
25. G.Bogoeva-Gaceva, A. Buzarovska, B. Dimzovski, Discoloration of Synthetic Dyeing Wastewater using Polyaluminium Chloride. G.U. Journal of Science, 21, 4, 123-128 (2008)
26. M.Avella, G. Bogoeva-Gaceva, A. Buzarovska, M.Errico, G.Gentile, A. Grozdanov, Poly(lactic acid)-based biocomposites with kenaf fibers. Journal of Applied Polymer Science, 108, 6, 3542-3551 (2008)
27. A.Buzarovska, G.Bogoeva-Gaceva, A. Grozdanov, M.Avella, G.Gentile, M. Errico, Potential use of rice straw as filler in eco-composite materials. Australian Journal of Crop Science, 1(2), 37-42 (2008)
28. A.Buzarovska, G.Bogoeva-Gaceva, A.Grozdanov, M.Avella, G.Gentile, M.Errico, Crystallization behavior of poly(hydroxybytyrate-co-valerate) in model and bulk PHBV/kenaf fiber composites. Journal of Material Science, 42, 6501-6509 (2007)
29. M.Avella, G.Bogoeva-Gaceva, A.Buzarovska, M.Errico, G.Gentile, A.Grozdanov, Poly(3-hydrohybutyrate-co-3-hydrohyvalerate) based biocomposites reinforced with kenaf fibres. Journal of Applied Polymer Science, 104, 5, 3192-3200 (2007)
30. A.Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, M.Avella, M.Errico, G. Gentile, Nonisothermal crystallization kinetics of kenaf fiber/polypropylene composites. Polymer Engineering Science, 47, 5, 745-749 (2007)
31. G.Bogoeva-Gaceva, M. Avella, M.Malinconico, A.Buzarovska, A.Grozdanov, G.Gentile, M.E. Errico Natural Fiber Eco-Composites. Polymer Composites, 28, 1, 98-107 (2007)
32. A.Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, M.Avella, M.Errico, G. Gentile, Rice straw as an alternative reinforcement in polypropylene composites. Agronomy Sustainable Development, 26, 4, 251-255 (2006)
33. A.Buzarovska, G.Bogoeva-Gaceva, A.Grozdanov, M.Avella, Crystallization behavior of poly(hydroxybutyrate) in model composites with kenaf fibers. Journal of Applied Polymer Science, 102, 1, 804-809 (2006)
34. A. Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, E.Nedkov, Nonisothermal melting and crystallization of polypropylene in model composites: Kinetic analysis. Journal of Polymer Science B, 43, 1, 66-73 (2005)
35. A.Buzarovska, Lj.Arsov, Relaxation kinetics in thiophene/3-alkylthiophene random copolymers. Polymer International, 53, 11, 1866-1869 (2004)
36. A.Buzarovska, Lj.Arsov, Comparative study of the electrochemical response of poly(alkyl thiophene) derivatives deposited on platinum and titanium electrodes. Polymer Bulletin, 50, 161-168 (2003)
37. A.Buzarovska, Lj Arsov, N. Hebestreit and W.Plieth, Synthesis and characterization of thiophene/3-alkylthiophene random cooligomers, Journal of Solid State Electrochemistry, 7, 49-54 (2002)
38. A.Buzarovska, Lj.Arsov, Relaxation process at conductive poly(thiophene) and its poly(alkyl) derivatives: Kinetics of electrochemical doping. Polymer Bulletin, 48, 99-104 (2002)
39. A. Buzarovska, S. Koseva, M.Cvetkovska, E.Nedkov, Phase transitions of poly(ethylene oxide)-poly(dicyclohexyl itaconate) block copolymers. Bulletin of the Chemists and Technologist of Macedonia, 20, 2, 111-119 (2001)
40. K.Colancevska, V. Dimova, V. Kukurinov, D. Molnar, A.Buzarovska, Synthesis, antibacterial and antifungal activity of 4-substituted-5-aryl-1,2,4-triazoles. Molecules, 6, 815-824 (2001)
41. A.Buzarovska, I.Arsova, Lj. Arsov, Electrochemical synthesis of poly(2-methyl aniline): electrochemical and spectroscopic characterization. Journal of Serbian Chemical Society, 66, 1, 27-37 (2001)
42. A.Buzarovska, S.Koseva, M. Cvetkovska, E. Nedkov, Poly(ethylene oxide) blends with poly(ethylene oxide)/poly(dicyclohexyl itaconate) block copolymers. European Polymer Journal, 37, 141-149 (2001)
43. M.Cvetkovska, S. Koseva, A.Buzarovska, B.Baysal, B. Yasar, O. Yilmaz, I. Popovic, L Katsikas, ABA type block copolymers of poly(monobutylitaconate) and poly(monocyclohexylitaconate) with poly(dimethylsiloxane): Synthesis and characterization. Macromolecular Chemistry and Physics 201, 6, 685-693 (2000)
44. M. Cvetkovska S.Koseva, A.Buzarovska, M.Lazarevic, B.Baysal, E. Hamurcu, N.Uyanik, Characteriation of polystyrene/polydimethyl- siloxane /polystyrene block copolymers obtained by various preparation procedures. Bulletin of the Chemists and Technologist of Macedonia, 15, 1, 15-22 (1996)
45. C.Silvestre, S.Cimmino, E.Di Pace, E.Martuschelli, M.Monaco, A.Buzarovska, S.Koseva, Morphology and Crystallization of isotactic polypropylene/poly(dicyclohexylitaconate) blends, Polymer Networks and Blends, 6, 2, 73-80 (1996)
46. S.Cimmino, E.Di Pace, E.Martuschelli, C.Silvestre, A.Buzarovska, S.Koseva, Phase structure, morphology and crystallization of poly(ethyleneoxide)/poly(dicyclohexylitaconate) blends, Polymer Networks and Blends, 5, 2, 63-68 (1995)
1. NATO SPS G5772 Portable chargers for soldiers-THOR (16.9.2020-16.9.2023)
2. BIOCOMP3DPRINT-12-AUF Obtention par impression 3D de biomatériaux composites aux propriétés antibactériennes (1.3.2019-1.9.2020)
3. BIOCOMPMAT-05-AUF Composite materials based on polymers and ceramic particles, with applications in tissue engineering and controlled drug delivery (2016-2017)
4. COST TU1207 Next Generation Design Guidelines for Composites in Construction (2013-2017)
5. Нанокомпозити од биоразградливи полимери и керамички полнители, Билатерален проект со Р. Словенија(2010-2012), главен истражувач
6.Биоразградливи полимерни смеси, МОН (2006-2009), главен истажувач
7.Eco-houses based on eco-friendly polymer construction composite materials (FP6, INCO-CT-2004-509185, раководител, Гордана Богоева Гацева(2004-2007)
8.COST-P12 Кристализација на полимерите: интегрирање на експерименталните и теоретските пристапи (2004-2007)
9.Примена на природни влакна како зајакнувачи во еколошки композити,МОН, раководител Анита Грозданов (2006-2009)
англиски
Доктор на технички науки, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје, 2003.
Магистер на технички науки, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје,1994.
Специјалист по полимерни материјали, Универзитетот во Ферара,Италија,1993.
Дипломиран инженер технолог, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје, 1989.
2013 редовен професор на Технолошко-металуршки факултет, УКИМ
2008 вонреден професор на Технолошко-металуршки факултет, УКИМ
2003 доцент на Технолошко-металуршки факултет, УКИМ
1994 асистент на Технолошко-металуршки факултет, УКИМ
1989 помлад асистет на Технолошко-металуршки факултет УКИМ
Department of Science and Engineering of Oxide Materials and Nanomaterials, Polytechnic University of Bucharest, Romania, May 2017.
ICPEES/ECPM, Univerity of Strasbourg, France, December 2016.
Department of Chemistry, University of Bologna, Italy, October-November 2014.
Institute of Research on Polymer Technology, Naples, Italy, June-July 2005.
Department for Physical Chemistry and Electrochemistry,University of Dresden, Germany, January-February 2000.
Department of Chemistry, University of Naples Federico II, Italy, May-June 1996.
Institute of Research on Polymer Technology, Arco Felice, Naples, Italy, September 1992- April 1993.
1. Member of Europen Polymer Federation
2. Society of Chemists and Technologists of Macedonia
3. Society of Chemical Industry, UK
Reviwer
1. Polymer International
2. Journal of Applied Polymer Science
3. Journal of Material Science
4. Journal of Thermal Analysis
5. Composites A
6. Journal of Reinforced Plastics and Composites
7. Phosphorus, Sulfur, and Silicon and the Related Elements
1. Методи на испитување на органски соединенија
2. Карактеризација на материјалите
3. Композити и нанокомпозити
3. Биоразградливи полимерни материјали
1.Инструментални техники и методи за анализа на примероци од животната средина
2.Одбрани инструментални методи за карактеризација на влакно
1. A. Buzarovska, Bio-nanocomposites of biodegradable polymers and inorganic fillers, CCTM 2010, XXI Congress of Chemists and Technologists of Macedonia, Ohrid, 23-26.09.2010
2. А.Бужаровска, Употреба на земјоделски ресурси во композитни материјали со биоразградливи полимери,работилница “Можности за примена на обновливи ресурси во композитни конструкциони материјали 1.2.2007, хотел Карпош Скопје (2007)
3. A.Buzarovska, Production and Polymer Processing in Republic of Macedonia; Research in the field, Conference on Polymeric Materials and Additives, p. 12. November 17-18, Zagreb, Croatia (2005)
4. A.Buzarovska and Lj.Arsov, Synthesis and Characterization of polythiophene copolymers, 17th Congress of Chemists and Technologists of Macedonia, 18-20 April, 2002
5. М. Цветковска, А.Бужаровска, С.Ќосева, Е.Хамурку, Е.Јилдиз, Синтеза на PS-PDMS-PS блок кополимери по различни постапки,Прво Советување за полимери и полимерни материјали, Скопје 26-28 Октомври 1995
6. А.Бужаровска, С.Ќосева, Мешливост, фазни односи и морфологија мешавине атактичног поли(метилметакрилата)/поли(дициклохексил итаконата, XXXVI Саветовање српског хемиског друштва, Белград, 1-3.06-1994
2. M Kubin, P Makreski, M Zanoni, G Selleri, L Gasperini, D Fabiani, C Gualandi, A Bužarovska, Piezoelectric properties of PVDF-TrFE/BaTiO3 composite foams with different contents of TrFE units. Polymer Composites (2023)
3. E Stojchevska, R Popeski-Dimovski, Ž Kokolanski, C Gualandi, A Bužarovska,Effect of Particle Functionalization on Structural and Dielectric Properties of Flexible TPU/BaTiO3/MWCNTs Composite Films. Macromolecular Chemistry and Physics (2023)
4. A.Bužarovska, M. Kubin, P.Makreski, M. Zanoni, L.Gasperini, G. Selleri, D. Fabiani & C. Gualandi, PVDF/BaTiO3 composite foams with high content of β phase by thermally induced phase separation (TIPS). Journal of Polymer Research, 29, 272 (2022)
5. A. Bužarovska, J. Blazevska-Gilev, B. T. Pérez-Martnez, L. R. Balahura, G. Gradisteanu Pircalabioru, S. Dinescu & M. Costache, Poly(l-lactic acid)/alkali lignin composites: properties, biocompatibility, cytotoxicity and antimicrobial behavior. Journal of Materials Science, 56, 24, 13785–13800 (2021)
6. Aleksandra Bužarovska, Sorina Dinescu, Andreea D.Lazar, Mirela Serban, Gratiela G.Pircalabioru, Marieta Costache, Chiara Gualandi, Luc Avérous, Nanocomposite foams based on flexible biobased thermoplastic polyurethane and ZnO nanoparticles as potential wound dressing materials. Materials Science and Engineering: C, Volume 104, 109893 (2019)
7. Aleksandra Buzarovska, Sorina Dinescu, Leona Chitoiu, Marieta Costache, Porous poly(l-lactic acid) nanocomposite scaffolds with functionalized TiO2 nanoparticles: properties, cytocompatibility and drug release capability.Journal of Materials Science, 53, 16, 11151-11166 (2018)
8. P. Karamanolevski, A. Buzarovska, G.Bogoeva-Gaceva, The effect of Curing Agents on Basic properties of Silicone-epoxy Hybrid resin. Silicon, 10, 6, 2915–2925 (2018)
9. A.Buzarovska, Preparation and characterization of poly(ε-caprolactone)/ZnO foams for tissue engineering applications. Journal of Materials Science, 52, 20, 12067–12078 (2017)
10. A.Buzarovska, G.Bogoeva-Gaceva, R.Fajgar, Effect of the talc filler on structural, water vapor barrier and mechanical properties of poly(lactic acid) composites. Journal of Polymer Engineering, 36, 2, 181-188 (2016)
11. A. Buzarovska, V. Stefov, M. Najdoski, G. Bogoeva-Gaceva, Thermal analysis of multi-walled carbon nanotubes material obtained by catalytic pyrolysis of polyethylene. Macedonian Journal of Chemistry and Chemical Engineering, 34, 2, 373-379 (2015)
12. A. Buzarovska, C.Gualandi, A.Parrilli, M. Scandola, Effect of TiO2 nanoparticle loading on Poly(L-lactic acid) porous scaffolds fabricated by TIPS. Journal of Composites B, 81,189-195 (2015)
13. A. Ivanoska Dacik, A. Buzarovska, G. Bogoeva Gaceva, Clay Improved dispersion of carbon nanotubes in different solvents. Contributions, Section of Natural, Mathematical and Biotechnical Sciences, MASA, 36, 1, 5-10 (2015)
14.V. Stefov, M. Najdoski, G. Bogoeva-Gaceva and A. Buzarovska, Properties assessment of multiwalled carbon nanotubes. A comparative study. Synthetic Metals, 197, 159-167 (2014)
15. A. Ivanoska Dacik, G. Bogoeva Gaceva, A. Buzarovska, L. Raka, I. Gjorgiev Preparation and properties of natural rubber/organomontmorillonite; from lab samples to bulk materials. Macedonian Journal of Chemistry and Chemical Engineering, 33, 2, 249-265 (2014)
16. G.Bogoeva-Gaceva, A.Buzarovska, Rapid method for evaluation of cure kinetics of thermosetting polymers. Macedonian Journal of Chemistry and Chemical Engineering, 32, 337-344 (2013
17. A. Buzarovska, PLA nanocomposites with functionalized TiO2 nanoparticles. Polymer-Plastics Technology and Engineering, 52, 3, 280-286 (2013)
18. A. Buzarovska, A.Grozdanov, BiodegradablePoly(L-lactic acid) /TiO2 nanocomposites: Thermal properties and degradation. Journal of Applied Polymer Science, 123, 2187-2193 (2012)
19. A.Grozdanov, A.Buzarovska, M.Avella, M.Errico, G.Gentile, PCL/MWCNT Nanocomposites as nanosensors, Nato Science for Peace and Security Series-B: Physics and Biophysics, Chapter 15, 149-154 (2011)
20. A. Grozdanov, M.Avella, A.Buzarovska, G.Gentile, M.Errico, Reuse of Natural reinforced eco-composites in polymer mortars. Polymer Engineering and Science, 50, 4, 762-766 (2010)
21. M.Avella, M.E.Errico, G.Gentile, A.Buzarovska, A.Grozdanov, Chapter 13: Green composites based on biodegradable polymer matrices. ENVIRONMETALLY DEGRADABLE MATERIALS BASED ON MULTICOMPONENT POLYMERIC SYSTEMS, Ed. by Cornelie Vasile and Gennady E.Zaikov, Koninklijke Brill NV. Leiden, The Netherlands (2009)
22. M. Avella, A. Buzarovska, M.Errico, G.Gentile, A.Grozdanov, Eco-Challenges of Bio-Based Polymer Composites. Materials, 2, 911-925 (2009)
23. A. Buzarovska, A. Grozdanov, M.Avella, G.Gentile, M.Errico, Poly(hydroxybutyrate-co-hydroxyvalerate)/ Titanium Dioxide Nanocomposites: A Degradation Study. Journal of Appled Polymer Science, 114, 5, 3118-3124 (2009)
24. A. Buzarovska, A.Grozdanov, Crystallization kinetics of poly(hydroxybutyrate-co-hydroxyvalerate) and poly(dicyclohexylitaconate) PHBV/PDCHI blends: thermal properties and hydrolytic degradation. Journal of Material Science, 44, 1844-1850 (2009)
25. G.Bogoeva-Gaceva, A. Buzarovska, B. Dimzovski, Discoloration of Synthetic Dyeing Wastewater using Polyaluminium Chloride. G.U. Journal of Science, 21, 4, 123-128 (2008)
26. M.Avella, G. Bogoeva-Gaceva, A. Buzarovska, M.Errico, G.Gentile, A. Grozdanov, Poly(lactic acid)-based biocomposites with kenaf fibers. Journal of Applied Polymer Science, 108, 6, 3542-3551 (2008)
27. A.Buzarovska, G.Bogoeva-Gaceva, A. Grozdanov, M.Avella, G.Gentile, M. Errico, Potential use of rice straw as filler in eco-composite materials. Australian Journal of Crop Science, 1(2), 37-42 (2008)
28. A.Buzarovska, G.Bogoeva-Gaceva, A.Grozdanov, M.Avella, G.Gentile, M.Errico, Crystallization behavior of poly(hydroxybytyrate-co-valerate) in model and bulk PHBV/kenaf fiber composites. Journal of Material Science, 42, 6501-6509 (2007)
29. M.Avella, G.Bogoeva-Gaceva, A.Buzarovska, M.Errico, G.Gentile, A.Grozdanov, Poly(3-hydrohybutyrate-co-3-hydrohyvalerate) based biocomposites reinforced with kenaf fibres. Journal of Applied Polymer Science, 104, 5, 3192-3200 (2007)
30. A.Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, M.Avella, M.Errico, G. Gentile, Nonisothermal crystallization kinetics of kenaf fiber/polypropylene composites. Polymer Engineering Science, 47, 5, 745-749 (2007)
31. G.Bogoeva-Gaceva, M. Avella, M.Malinconico, A.Buzarovska, A.Grozdanov, G.Gentile, M.E. Errico Natural Fiber Eco-Composites. Polymer Composites, 28, 1, 98-107 (2007)
32. A.Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, M.Avella, M.Errico, G. Gentile, Rice straw as an alternative reinforcement in polypropylene composites. Agronomy Sustainable Development, 26, 4, 251-255 (2006)
33. A.Buzarovska, G.Bogoeva-Gaceva, A.Grozdanov, M.Avella, Crystallization behavior of poly(hydroxybutyrate) in model composites with kenaf fibers. Journal of Applied Polymer Science, 102, 1, 804-809 (2006)
34. A. Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, E.Nedkov, Nonisothermal melting and crystallization of polypropylene in model composites: Kinetic analysis. Journal of Polymer Science B, 43, 1, 66-73 (2005)
35. A.Buzarovska, Lj.Arsov, Relaxation kinetics in thiophene/3-alkylthiophene random copolymers. Polymer International, 53, 11, 1866-1869 (2004)
36. A.Buzarovska, Lj.Arsov, Comparative study of the electrochemical response of poly(alkyl thiophene) derivatives deposited on platinum and titanium electrodes. Polymer Bulletin, 50, 161-168 (2003)
37. A.Buzarovska, Lj Arsov, N. Hebestreit and W.Plieth, Synthesis and characterization of thiophene/3-alkylthiophene random cooligomers, Journal of Solid State Electrochemistry, 7, 49-54 (2002)
38. A.Buzarovska, Lj.Arsov, Relaxation process at conductive poly(thiophene) and its poly(alkyl) derivatives: Kinetics of electrochemical doping. Polymer Bulletin, 48, 99-104 (2002)
39. A. Buzarovska, S. Koseva, M.Cvetkovska, E.Nedkov, Phase transitions of poly(ethylene oxide)-poly(dicyclohexyl itaconate) block copolymers. Bulletin of the Chemists and Technologist of Macedonia, 20, 2, 111-119 (2001)
40. K.Colancevska, V. Dimova, V. Kukurinov, D. Molnar, A.Buzarovska, Synthesis, antibacterial and antifungal activity of 4-substituted-5-aryl-1,2,4-triazoles. Molecules, 6, 815-824 (2001)
41. A.Buzarovska, I.Arsova, Lj. Arsov, Electrochemical synthesis of poly(2-methyl aniline): electrochemical and spectroscopic characterization. Journal of Serbian Chemical Society, 66, 1, 27-37 (2001)
42. A.Buzarovska, S.Koseva, M. Cvetkovska, E. Nedkov, Poly(ethylene oxide) blends with poly(ethylene oxide)/poly(dicyclohexyl itaconate) block copolymers. European Polymer Journal, 37, 141-149 (2001)
43. M.Cvetkovska, S. Koseva, A.Buzarovska, B.Baysal, B. Yasar, O. Yilmaz, I. Popovic, L Katsikas, ABA type block copolymers of poly(monobutylitaconate) and poly(monocyclohexylitaconate) with poly(dimethylsiloxane): Synthesis and characterization. Macromolecular Chemistry and Physics 201, 6, 685-693 (2000)
44. M. Cvetkovska S.Koseva, A.Buzarovska, M.Lazarevic, B.Baysal, E. Hamurcu, N.Uyanik, Characteriation of polystyrene/polydimethyl- siloxane /polystyrene block copolymers obtained by various preparation procedures. Bulletin of the Chemists and Technologist of Macedonia, 15, 1, 15-22 (1996)
45. C.Silvestre, S.Cimmino, E.Di Pace, E.Martuschelli, M.Monaco, A.Buzarovska, S.Koseva, Morphology and Crystallization of isotactic polypropylene/poly(dicyclohexylitaconate) blends, Polymer Networks and Blends, 6, 2, 73-80 (1996)
46. S.Cimmino, E.Di Pace, E.Martuschelli, C.Silvestre, A.Buzarovska, S.Koseva, Phase structure, morphology and crystallization of poly(ethyleneoxide)/poly(dicyclohexylitaconate) blends, Polymer Networks and Blends, 5, 2, 63-68 (1995)
1. NATO SPS G5772 Portable chargers for soldiers-THOR (16.9.2020-16.9.2023)
2. BIOCOMP3DPRINT-12-AUF Obtention par impression 3D de biomatériaux composites aux propriétés antibactériennes (1.3.2019-1.9.2020)
3. BIOCOMPMAT-05-AUF Composite materials based on polymers and ceramic particles, with applications in tissue engineering and controlled drug delivery (2016-2017)
4. COST TU1207 Next Generation Design Guidelines for Composites in Construction (2013-2017)
5. Нанокомпозити од биоразградливи полимери и керамички полнители, Билатерален проект со Р. Словенија(2010-2012), главен истражувач
6.Биоразградливи полимерни смеси, МОН (2006-2009), главен истажувач
7.Eco-houses based on eco-friendly polymer construction composite materials (FP6, INCO-CT-2004-509185, раководител, Гордана Богоева Гацева(2004-2007)
8.COST-P12 Кристализација на полимерите: интегрирање на експерименталните и теоретските пристапи (2004-2007)
9.Примена на природни влакна како зајакнувачи во еколошки композити,МОН, раководител Анита Грозданов (2006-2009)
англиски
Доктор на технички науки, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје, 2003.
Магистер на технички науки, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје,1994.
Специјалист по полимерни материјали, Универзитетот во Ферара,Италија,1993.
Дипломиран инженер технолог, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје, 1989.
2013 редовен професор на Технолошко-металуршки факултет, УКИМ
2008 вонреден професор на Технолошко-металуршки факултет, УКИМ
2003 доцент на Технолошко-металуршки факултет, УКИМ
1994 асистент на Технолошко-металуршки факултет, УКИМ
1989 помлад асистет на Технолошко-металуршки факултет УКИМ
Department of Science and Engineering of Oxide Materials and Nanomaterials, Polytechnic University of Bucharest, Romania, May 2017.
ICPEES/ECPM, Univerity of Strasbourg, France, December 2016.
Department of Chemistry, University of Bologna, Italy, October-November 2014.
Institute of Research on Polymer Technology, Naples, Italy, June-July 2005.
Department for Physical Chemistry and Electrochemistry,University of Dresden, Germany, January-February 2000.
Department of Chemistry, University of Naples Federico II, Italy, May-June 1996.
Institute of Research on Polymer Technology, Arco Felice, Naples, Italy, September 1992- April 1993.
1. Member of Europen Polymer Federation
2. Society of Chemists and Technologists of Macedonia
3. Society of Chemical Industry, UK
Reviwer
1. Polymer International
2. Journal of Applied Polymer Science
3. Journal of Material Science
4. Journal of Thermal Analysis
5. Composites A
6. Journal of Reinforced Plastics and Composites
7. Phosphorus, Sulfur, and Silicon and the Related Elements
1. Методи на испитување на органски соединенија
2. Карактеризација на материјалите
3. Композити и нанокомпозити
3. Биоразградливи полимерни материјали
1.Инструментални техники и методи за анализа на примероци од животната средина
2.Одбрани инструментални методи за карактеризација на влакно
1. A. Buzarovska, Bio-nanocomposites of biodegradable polymers and inorganic fillers, CCTM 2010, XXI Congress of Chemists and Technologists of Macedonia, Ohrid, 23-26.09.2010
2. А.Бужаровска, Употреба на земјоделски ресурси во композитни материјали со биоразградливи полимери,работилница “Можности за примена на обновливи ресурси во композитни конструкциони материјали 1.2.2007, хотел Карпош Скопје (2007)
3. A.Buzarovska, Production and Polymer Processing in Republic of Macedonia; Research in the field, Conference on Polymeric Materials and Additives, p. 12. November 17-18, Zagreb, Croatia (2005)
4. A.Buzarovska and Lj.Arsov, Synthesis and Characterization of polythiophene copolymers, 17th Congress of Chemists and Technologists of Macedonia, 18-20 April, 2002
5. М. Цветковска, А.Бужаровска, С.Ќосева, Е.Хамурку, Е.Јилдиз, Синтеза на PS-PDMS-PS блок кополимери по различни постапки,Прво Советување за полимери и полимерни материјали, Скопје 26-28 Октомври 1995
6. А.Бужаровска, С.Ќосева, Мешливост, фазни односи и морфологија мешавине атактичног поли(метилметакрилата)/поли(дициклохексил итаконата, XXXVI Саветовање српског хемиског друштва, Белград, 1-3.06-1994
2. M Kubin, P Makreski, M Zanoni, G Selleri, L Gasperini, D Fabiani, C Gualandi, A Bužarovska, Piezoelectric properties of PVDF-TrFE/BaTiO3 composite foams with different contents of TrFE units. Polymer Composites (2023)
3. E Stojchevska, R Popeski-Dimovski, Ž Kokolanski, C Gualandi, A Bužarovska,Effect of Particle Functionalization on Structural and Dielectric Properties of Flexible TPU/BaTiO3/MWCNTs Composite Films. Macromolecular Chemistry and Physics (2023)
4. A.Bužarovska, M. Kubin, P.Makreski, M. Zanoni, L.Gasperini, G. Selleri, D. Fabiani & C. Gualandi, PVDF/BaTiO3 composite foams with high content of β phase by thermally induced phase separation (TIPS). Journal of Polymer Research, 29, 272 (2022)
5. A. Bužarovska, J. Blazevska-Gilev, B. T. Pérez-Martnez, L. R. Balahura, G. Gradisteanu Pircalabioru, S. Dinescu & M. Costache, Poly(l-lactic acid)/alkali lignin composites: properties, biocompatibility, cytotoxicity and antimicrobial behavior. Journal of Materials Science, 56, 24, 13785–13800 (2021)
6. Aleksandra Bužarovska, Sorina Dinescu, Andreea D.Lazar, Mirela Serban, Gratiela G.Pircalabioru, Marieta Costache, Chiara Gualandi, Luc Avérous, Nanocomposite foams based on flexible biobased thermoplastic polyurethane and ZnO nanoparticles as potential wound dressing materials. Materials Science and Engineering: C, Volume 104, 109893 (2019)
7. Aleksandra Buzarovska, Sorina Dinescu, Leona Chitoiu, Marieta Costache, Porous poly(l-lactic acid) nanocomposite scaffolds with functionalized TiO2 nanoparticles: properties, cytocompatibility and drug release capability.Journal of Materials Science, 53, 16, 11151-11166 (2018)
8. P. Karamanolevski, A. Buzarovska, G.Bogoeva-Gaceva, The effect of Curing Agents on Basic properties of Silicone-epoxy Hybrid resin. Silicon, 10, 6, 2915–2925 (2018)
9. A.Buzarovska, Preparation and characterization of poly(ε-caprolactone)/ZnO foams for tissue engineering applications. Journal of Materials Science, 52, 20, 12067–12078 (2017)
10. A.Buzarovska, G.Bogoeva-Gaceva, R.Fajgar, Effect of the talc filler on structural, water vapor barrier and mechanical properties of poly(lactic acid) composites. Journal of Polymer Engineering, 36, 2, 181-188 (2016)
11. A. Buzarovska, V. Stefov, M. Najdoski, G. Bogoeva-Gaceva, Thermal analysis of multi-walled carbon nanotubes material obtained by catalytic pyrolysis of polyethylene. Macedonian Journal of Chemistry and Chemical Engineering, 34, 2, 373-379 (2015)
12. A. Buzarovska, C.Gualandi, A.Parrilli, M. Scandola, Effect of TiO2 nanoparticle loading on Poly(L-lactic acid) porous scaffolds fabricated by TIPS. Journal of Composites B, 81,189-195 (2015)
13. A. Ivanoska Dacik, A. Buzarovska, G. Bogoeva Gaceva, Clay Improved dispersion of carbon nanotubes in different solvents. Contributions, Section of Natural, Mathematical and Biotechnical Sciences, MASA, 36, 1, 5-10 (2015)
14.V. Stefov, M. Najdoski, G. Bogoeva-Gaceva and A. Buzarovska, Properties assessment of multiwalled carbon nanotubes. A comparative study. Synthetic Metals, 197, 159-167 (2014)
15. A. Ivanoska Dacik, G. Bogoeva Gaceva, A. Buzarovska, L. Raka, I. Gjorgiev Preparation and properties of natural rubber/organomontmorillonite; from lab samples to bulk materials. Macedonian Journal of Chemistry and Chemical Engineering, 33, 2, 249-265 (2014)
16. G.Bogoeva-Gaceva, A.Buzarovska, Rapid method for evaluation of cure kinetics of thermosetting polymers. Macedonian Journal of Chemistry and Chemical Engineering, 32, 337-344 (2013
17. A. Buzarovska, PLA nanocomposites with functionalized TiO2 nanoparticles. Polymer-Plastics Technology and Engineering, 52, 3, 280-286 (2013)
18. A. Buzarovska, A.Grozdanov, BiodegradablePoly(L-lactic acid) /TiO2 nanocomposites: Thermal properties and degradation. Journal of Applied Polymer Science, 123, 2187-2193 (2012)
19. A.Grozdanov, A.Buzarovska, M.Avella, M.Errico, G.Gentile, PCL/MWCNT Nanocomposites as nanosensors, Nato Science for Peace and Security Series-B: Physics and Biophysics, Chapter 15, 149-154 (2011)
20. A. Grozdanov, M.Avella, A.Buzarovska, G.Gentile, M.Errico, Reuse of Natural reinforced eco-composites in polymer mortars. Polymer Engineering and Science, 50, 4, 762-766 (2010)
21. M.Avella, M.E.Errico, G.Gentile, A.Buzarovska, A.Grozdanov, Chapter 13: Green composites based on biodegradable polymer matrices. ENVIRONMETALLY DEGRADABLE MATERIALS BASED ON MULTICOMPONENT POLYMERIC SYSTEMS, Ed. by Cornelie Vasile and Gennady E.Zaikov, Koninklijke Brill NV. Leiden, The Netherlands (2009)
22. M. Avella, A. Buzarovska, M.Errico, G.Gentile, A.Grozdanov, Eco-Challenges of Bio-Based Polymer Composites. Materials, 2, 911-925 (2009)
23. A. Buzarovska, A. Grozdanov, M.Avella, G.Gentile, M.Errico, Poly(hydroxybutyrate-co-hydroxyvalerate)/ Titanium Dioxide Nanocomposites: A Degradation Study. Journal of Appled Polymer Science, 114, 5, 3118-3124 (2009)
24. A. Buzarovska, A.Grozdanov, Crystallization kinetics of poly(hydroxybutyrate-co-hydroxyvalerate) and poly(dicyclohexylitaconate) PHBV/PDCHI blends: thermal properties and hydrolytic degradation. Journal of Material Science, 44, 1844-1850 (2009)
25. G.Bogoeva-Gaceva, A. Buzarovska, B. Dimzovski, Discoloration of Synthetic Dyeing Wastewater using Polyaluminium Chloride. G.U. Journal of Science, 21, 4, 123-128 (2008)
26. M.Avella, G. Bogoeva-Gaceva, A. Buzarovska, M.Errico, G.Gentile, A. Grozdanov, Poly(lactic acid)-based biocomposites with kenaf fibers. Journal of Applied Polymer Science, 108, 6, 3542-3551 (2008)
27. A.Buzarovska, G.Bogoeva-Gaceva, A. Grozdanov, M.Avella, G.Gentile, M. Errico, Potential use of rice straw as filler in eco-composite materials. Australian Journal of Crop Science, 1(2), 37-42 (2008)
28. A.Buzarovska, G.Bogoeva-Gaceva, A.Grozdanov, M.Avella, G.Gentile, M.Errico, Crystallization behavior of poly(hydroxybytyrate-co-valerate) in model and bulk PHBV/kenaf fiber composites. Journal of Material Science, 42, 6501-6509 (2007)
29. M.Avella, G.Bogoeva-Gaceva, A.Buzarovska, M.Errico, G.Gentile, A.Grozdanov, Poly(3-hydrohybutyrate-co-3-hydrohyvalerate) based biocomposites reinforced with kenaf fibres. Journal of Applied Polymer Science, 104, 5, 3192-3200 (2007)
30. A.Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, M.Avella, M.Errico, G. Gentile, Nonisothermal crystallization kinetics of kenaf fiber/polypropylene composites. Polymer Engineering Science, 47, 5, 745-749 (2007)
31. G.Bogoeva-Gaceva, M. Avella, M.Malinconico, A.Buzarovska, A.Grozdanov, G.Gentile, M.E. Errico Natural Fiber Eco-Composites. Polymer Composites, 28, 1, 98-107 (2007)
32. A.Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, M.Avella, M.Errico, G. Gentile, Rice straw as an alternative reinforcement in polypropylene composites. Agronomy Sustainable Development, 26, 4, 251-255 (2006)
33. A.Buzarovska, G.Bogoeva-Gaceva, A.Grozdanov, M.Avella, Crystallization behavior of poly(hydroxybutyrate) in model composites with kenaf fibers. Journal of Applied Polymer Science, 102, 1, 804-809 (2006)
34. A. Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, E.Nedkov, Nonisothermal melting and crystallization of polypropylene in model composites: Kinetic analysis. Journal of Polymer Science B, 43, 1, 66-73 (2005)
35. A.Buzarovska, Lj.Arsov, Relaxation kinetics in thiophene/3-alkylthiophene random copolymers. Polymer International, 53, 11, 1866-1869 (2004)
36. A.Buzarovska, Lj.Arsov, Comparative study of the electrochemical response of poly(alkyl thiophene) derivatives deposited on platinum and titanium electrodes. Polymer Bulletin, 50, 161-168 (2003)
37. A.Buzarovska, Lj Arsov, N. Hebestreit and W.Plieth, Synthesis and characterization of thiophene/3-alkylthiophene random cooligomers, Journal of Solid State Electrochemistry, 7, 49-54 (2002)
38. A.Buzarovska, Lj.Arsov, Relaxation process at conductive poly(thiophene) and its poly(alkyl) derivatives: Kinetics of electrochemical doping. Polymer Bulletin, 48, 99-104 (2002)
39. A. Buzarovska, S. Koseva, M.Cvetkovska, E.Nedkov, Phase transitions of poly(ethylene oxide)-poly(dicyclohexyl itaconate) block copolymers. Bulletin of the Chemists and Technologist of Macedonia, 20, 2, 111-119 (2001)
40. K.Colancevska, V. Dimova, V. Kukurinov, D. Molnar, A.Buzarovska, Synthesis, antibacterial and antifungal activity of 4-substituted-5-aryl-1,2,4-triazoles. Molecules, 6, 815-824 (2001)
41. A.Buzarovska, I.Arsova, Lj. Arsov, Electrochemical synthesis of poly(2-methyl aniline): electrochemical and spectroscopic characterization. Journal of Serbian Chemical Society, 66, 1, 27-37 (2001)
42. A.Buzarovska, S.Koseva, M. Cvetkovska, E. Nedkov, Poly(ethylene oxide) blends with poly(ethylene oxide)/poly(dicyclohexyl itaconate) block copolymers. European Polymer Journal, 37, 141-149 (2001)
43. M.Cvetkovska, S. Koseva, A.Buzarovska, B.Baysal, B. Yasar, O. Yilmaz, I. Popovic, L Katsikas, ABA type block copolymers of poly(monobutylitaconate) and poly(monocyclohexylitaconate) with poly(dimethylsiloxane): Synthesis and characterization. Macromolecular Chemistry and Physics 201, 6, 685-693 (2000)
44. M. Cvetkovska S.Koseva, A.Buzarovska, M.Lazarevic, B.Baysal, E. Hamurcu, N.Uyanik, Characteriation of polystyrene/polydimethyl- siloxane /polystyrene block copolymers obtained by various preparation procedures. Bulletin of the Chemists and Technologist of Macedonia, 15, 1, 15-22 (1996)
45. C.Silvestre, S.Cimmino, E.Di Pace, E.Martuschelli, M.Monaco, A.Buzarovska, S.Koseva, Morphology and Crystallization of isotactic polypropylene/poly(dicyclohexylitaconate) blends, Polymer Networks and Blends, 6, 2, 73-80 (1996)
46. S.Cimmino, E.Di Pace, E.Martuschelli, C.Silvestre, A.Buzarovska, S.Koseva, Phase structure, morphology and crystallization of poly(ethyleneoxide)/poly(dicyclohexylitaconate) blends, Polymer Networks and Blends, 5, 2, 63-68 (1995)
1. NATO SPS G5772 Portable chargers for soldiers-THOR (16.9.2020-16.9.2023)
2. BIOCOMP3DPRINT-12-AUF Obtention par impression 3D de biomatériaux composites aux propriétés antibactériennes (1.3.2019-1.9.2020)
3. BIOCOMPMAT-05-AUF Composite materials based on polymers and ceramic particles, with applications in tissue engineering and controlled drug delivery (2016-2017)
4. COST TU1207 Next Generation Design Guidelines for Composites in Construction (2013-2017)
5. Нанокомпозити од биоразградливи полимери и керамички полнители, Билатерален проект со Р. Словенија(2010-2012), главен истражувач
6.Биоразградливи полимерни смеси, МОН (2006-2009), главен истажувач
7.Eco-houses based on eco-friendly polymer construction composite materials (FP6, INCO-CT-2004-509185, раководител, Гордана Богоева Гацева(2004-2007)
8.COST-P12 Кристализација на полимерите: интегрирање на експерименталните и теоретските пристапи (2004-2007)
9.Примена на природни влакна како зајакнувачи во еколошки композити,МОН, раководител Анита Грозданов (2006-2009)
англиски
Доктор на технички науки, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје, 2003.
Магистер на технички науки, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје,1994.
Специјалист по полимерни материјали, Универзитетот во Ферара,Италија,1993.
Дипломиран инженер технолог, Универзитет „Св. Кирил и Методиј”, Технолошко-металуршки факултет, Скопје, 1989.
2013 редовен професор на Технолошко-металуршки факултет, УКИМ
2008 вонреден професор на Технолошко-металуршки факултет, УКИМ
2003 доцент на Технолошко-металуршки факултет, УКИМ
1994 асистент на Технолошко-металуршки факултет, УКИМ
1989 помлад асистет на Технолошко-металуршки факултет УКИМ
Department of Science and Engineering of Oxide Materials and Nanomaterials, Polytechnic University of Bucharest, Romania, May 2017.
ICPEES/ECPM, Univerity of Strasbourg, France, December 2016.
Department of Chemistry, University of Bologna, Italy, October-November 2014.
Institute of Research on Polymer Technology, Naples, Italy, June-July 2005.
Department for Physical Chemistry and Electrochemistry,University of Dresden, Germany, January-February 2000.
Department of Chemistry, University of Naples Federico II, Italy, May-June 1996.
Institute of Research on Polymer Technology, Arco Felice, Naples, Italy, September 1992- April 1993.
1. Member of Europen Polymer Federation
2. Society of Chemists and Technologists of Macedonia
3. Society of Chemical Industry, UK
Reviwer
1. Polymer International
2. Journal of Applied Polymer Science
3. Journal of Material Science
4. Journal of Thermal Analysis
5. Composites A
6. Journal of Reinforced Plastics and Composites
7. Phosphorus, Sulfur, and Silicon and the Related Elements
1. Методи на испитување на органски соединенија
2. Карактеризација на материјалите
3. Композити и нанокомпозити
3. Биоразградливи полимерни материјали
1.Инструментални техники и методи за анализа на примероци од животната средина
2.Одбрани инструментални методи за карактеризација на влакно
1. A. Buzarovska, Bio-nanocomposites of biodegradable polymers and inorganic fillers, CCTM 2010, XXI Congress of Chemists and Technologists of Macedonia, Ohrid, 23-26.09.2010
2. А.Бужаровска, Употреба на земјоделски ресурси во композитни материјали со биоразградливи полимери,работилница “Можности за примена на обновливи ресурси во композитни конструкциони материјали 1.2.2007, хотел Карпош Скопје (2007)
3. A.Buzarovska, Production and Polymer Processing in Republic of Macedonia; Research in the field, Conference on Polymeric Materials and Additives, p. 12. November 17-18, Zagreb, Croatia (2005)
4. A.Buzarovska and Lj.Arsov, Synthesis and Characterization of polythiophene copolymers, 17th Congress of Chemists and Technologists of Macedonia, 18-20 April, 2002
5. М. Цветковска, А.Бужаровска, С.Ќосева, Е.Хамурку, Е.Јилдиз, Синтеза на PS-PDMS-PS блок кополимери по различни постапки,Прво Советување за полимери и полимерни материјали, Скопје 26-28 Октомври 1995
6. А.Бужаровска, С.Ќосева, Мешливост, фазни односи и морфологија мешавине атактичног поли(метилметакрилата)/поли(дициклохексил итаконата, XXXVI Саветовање српског хемиског друштва, Белград, 1-3.06-1994
L. Avérous, S. Dinescu, Biobased multiphase foams with ZnO for wound dressing applications, Journal of Materials Science, 58, 17594–17609 (2023)
4. M Kubin, P Makreski, M Zanoni, G Selleri, L Gasperini, D Fabiani, C Gualandi, A Bužarovska, Piezoelectric properties of PVDF-TrFE/BaTiO3 composite foams with different contents of TrFE units. Polymer Composites (2023)
5. E Stojchevska, R Popeski-Dimovski, Ž Kokolanski, C Gualandi, A Bužarovska,Effect of Particle Functionalization on Structural and Dielectric Properties of Flexible TPU/BaTiO3/MWCNTs Composite Films. Macromolecular Chemistry and Physics (2023)
6. A.Bužarovska, M. Kubin, P.Makreski, M. Zanoni, L.Gasperini, G. Selleri, D. Fabiani & C. Gualandi, PVDF/BaTiO3 composite foams with high content of β phase by thermally induced phase separation (TIPS). Journal of Polymer Research, 29, 272 (2022)
7. A. Bužarovska, J. Blazevska-Gilev, B. T. Pérez-Martnez, L. R. Balahura, G. Gradisteanu Pircalabioru, S. Dinescu & M. Costache, Poly(l-lactic acid)/alkali lignin composites: properties, biocompatibility, cytotoxicity and antimicrobial behavior. Journal of Materials Science, 56, 24, 13785–13800 (2021)
8. Aleksandra Bužarovska, Sorina Dinescu, Andreea D.Lazar, Mirela Serban, Gratiela G.Pircalabioru, Marieta Costache, Chiara Gualandi, Luc Avérous, Nanocomposite foams based on flexible biobased thermoplastic polyurethane and ZnO nanoparticles as potential wound dressing materials. Materials Science and Engineering: C, Volume 104, 109893 (2019)
9. Aleksandra Buzarovska, Sorina Dinescu, Leona Chitoiu, Marieta Costache, Porous poly(l-lactic acid) nanocomposite scaffolds with functionalized TiO2 nanoparticles: properties, cytocompatibility and drug release capability.Journal of Materials Science, 53, 16, 11151-11166 (2018)
10. P. Karamanolevski, A. Buzarovska, G.Bogoeva-Gaceva, The effect of Curing Agents on Basic properties of Silicone-epoxy Hybrid resin. Silicon, 10, 6, 2915–2925 (2018)
11. A.Buzarovska, Preparation and characterization of poly(ε-caprolactone)/ZnO foams for tissue engineering applications. Journal of Materials Science, 52, 20, 12067–12078 (2017)
12. A.Buzarovska, G.Bogoeva-Gaceva, R.Fajgar, Effect of the talc filler on structural, water vapor barrier and mechanical properties of poly(lactic acid) composites. Journal of Polymer Engineering, 36, 2, 181-188 (2016)
13. A. Buzarovska, V. Stefov, M. Najdoski, G. Bogoeva-Gaceva, Thermal analysis of multi-walled carbon nanotubes material obtained by catalytic pyrolysis of polyethylene. Macedonian Journal of Chemistry and Chemical Engineering, 34, 2, 373-379 (2015)
14. A. Buzarovska, C.Gualandi, A.Parrilli, M. Scandola, Effect of TiO2 nanoparticle loading on Poly(L-lactic acid) porous scaffolds fabricated by TIPS. Journal of Composites B, 81,189-195 (2015)
15. A. Ivanoska Dacik, A. Buzarovska, G. Bogoeva Gaceva, Clay Improved dispersion of carbon nanotubes in different solvents. Contributions, Section of Natural, Mathematical and Biotechnical Sciences, MASA, 36, 1, 5-10 (2015)
16.V. Stefov, M. Najdoski, G. Bogoeva-Gaceva and A. Buzarovska, Properties assessment of multiwalled carbon nanotubes. A comparative study. Synthetic Metals, 197, 159-167 (2014)
17. A. Ivanoska Dacik, G. Bogoeva Gaceva, A. Buzarovska, L. Raka, I. Gjorgiev Preparation and properties of natural rubber/organomontmorillonite; from lab samples to bulk materials. Macedonian Journal of Chemistry and Chemical Engineering, 33, 2, 249-265 (2014)
18. G.Bogoeva-Gaceva, A.Buzarovska, Rapid method for evaluation of cure kinetics of thermosetting polymers. Macedonian Journal of Chemistry and Chemical Engineering, 32, 337-344 (2013
19. A. Buzarovska, PLA nanocomposites with functionalized TiO2 nanoparticles. Polymer-Plastics Technology and Engineering, 52, 3, 280-286 (2013)
20. A. Buzarovska, A.Grozdanov, BiodegradablePoly(L-lactic acid) /TiO2 nanocomposites: Thermal properties and degradation. Journal of Applied Polymer Science, 123, 2187-2193 (2012)
21. A.Grozdanov, A.Buzarovska, M.Avella, M.Errico, G.Gentile, PCL/MWCNT Nanocomposites as nanosensors, Nato Science for Peace and Security Series-B: Physics and Biophysics, Chapter 15, 149-154 (2011)
22. A. Grozdanov, M.Avella, A.Buzarovska, G.Gentile, M.Errico, Reuse of Natural reinforced eco-composites in polymer mortars. Polymer Engineering and Science, 50, 4, 762-766 (2010)
23. M.Avella, M.E.Errico, G.Gentile, A.Buzarovska, A.Grozdanov, Chapter 13: Green composites based on biodegradable polymer matrices. ENVIRONMETALLY DEGRADABLE MATERIALS BASED ON MULTICOMPONENT POLYMERIC SYSTEMS, Ed. by Cornelie Vasile and Gennady E.Zaikov, Koninklijke Brill NV. Leiden, The Netherlands (2009)
24. M. Avella, A. Buzarovska, M.Errico, G.Gentile, A.Grozdanov, Eco-Challenges of Bio-Based Polymer Composites. Materials, 2, 911-925 (2009)
25. A. Buzarovska, A. Grozdanov, M.Avella, G.Gentile, M.Errico, Poly(hydroxybutyrate-co-hydroxyvalerate)/ Titanium Dioxide Nanocomposites: A Degradation Study. Journal of Appled Polymer Science, 114, 5, 3118-3124 (2009)
26. A. Buzarovska, A.Grozdanov, Crystallization kinetics of poly(hydroxybutyrate-co-hydroxyvalerate) and poly(dicyclohexylitaconate) PHBV/PDCHI blends: thermal properties and hydrolytic degradation. Journal of Material Science, 44, 1844-1850 (2009)
27. G.Bogoeva-Gaceva, A. Buzarovska, B. Dimzovski, Discoloration of Synthetic Dyeing Wastewater using Polyaluminium Chloride. G.U. Journal of Science, 21, 4, 123-128 (2008)
28. M.Avella, G. Bogoeva-Gaceva, A. Buzarovska, M.Errico, G.Gentile, A. Grozdanov, Poly(lactic acid)-based biocomposites with kenaf fibers. Journal of Applied Polymer Science, 108, 6, 3542-3551 (2008)
29. A.Buzarovska, G.Bogoeva-Gaceva, A. Grozdanov, M.Avella, G.Gentile, M. Errico, Potential use of rice straw as filler in eco-composite materials. Australian Journal of Crop Science, 1(2), 37-42 (2008)
30. A.Buzarovska, G.Bogoeva-Gaceva, A.Grozdanov, M.Avella, G.Gentile, M.Errico, Crystallization behavior of poly(hydroxybytyrate-co-valerate) in model and bulk PHBV/kenaf fiber composites. Journal of Material Science, 42, 6501-6509 (2007)
31. M.Avella, G.Bogoeva-Gaceva, A.Buzarovska, M.Errico, G.Gentile, A.Grozdanov, Poly(3-hydrohybutyrate-co-3-hydrohyvalerate) based biocomposites reinforced with kenaf fibres. Journal of Applied Polymer Science, 104, 5, 3192-3200 (2007)
32. A.Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, M.Avella, M.Errico, G. Gentile, Nonisothermal crystallization kinetics of kenaf fiber/polypropylene composites. Polymer Engineering Science, 47, 5, 745-749 (2007)
33. G.Bogoeva-Gaceva, M. Avella, M.Malinconico, A.Buzarovska, A.Grozdanov, G.Gentile, M.E. Errico Natural Fiber Eco-Composites. Polymer Composites, 28, 1, 98-107 (2007)
34. A.Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, M.Avella, M.Errico, G. Gentile, Rice straw as an alternative reinforcement in polypropylene composites. Agronomy Sustainable Development, 26, 4, 251-255 (2006)
35. A.Buzarovska, G.Bogoeva-Gaceva, A.Grozdanov, M.Avella, Crystallization behavior of poly(hydroxybutyrate) in model composites with kenaf fibers. Journal of Applied Polymer Science, 102, 1, 804-809 (2006)
36. A. Grozdanov, A.Buzarovska, G.Bogoeva-Gaceva, E.Nedkov, Nonisothermal melting and crystallization of polypropylene in model composites: Kinetic analysis. Journal of Polymer Science B, 43, 1, 66-73 (2005)
37. A.Buzarovska, Lj.Arsov, Relaxation kinetics in thiophene/3-alkylthiophene random copolymers. Polymer International, 53, 11, 1866-1869 (2004)
38. A.Buzarovska, Lj.Arsov, Comparative study of the electrochemical response of poly(alkyl thiophene) derivatives deposited on platinum and titanium electrodes. Polymer Bulletin, 50, 161-168 (2003)
39. A.Buzarovska, Lj Arsov, N. Hebestreit and W.Plieth, Synthesis and characterization of thiophene/3-alkylthiophene random cooligomers, Journal of Solid State Electrochemistry, 7, 49-54 (2002)
40. A.Buzarovska, Lj.Arsov, Relaxation process at conductive poly(thiophene) and its poly(alkyl) derivatives: Kinetics of electrochemical doping. Polymer Bulletin, 48, 99-104 (2002)
41. A. Buzarovska, S. Koseva, M.Cvetkovska, E.Nedkov, Phase transitions of poly(ethylene oxide)-poly(dicyclohexyl itaconate) block copolymers. Bulletin of the Chemists and Technologist of Macedonia, 20, 2, 111-119 (2001)
42. K.Colancevska, V. Dimova, V. Kukurinov, D. Molnar, A.Buzarovska, Synthesis, antibacterial and antifungal activity of 4-substituted-5-aryl-1,2,4-triazoles. Molecules, 6, 815-824 (2001)
43. A.Buzarovska, I.Arsova, Lj. Arsov, Electrochemical synthesis of poly(2-methyl aniline): electrochemical and spectroscopic characterization. Journal of Serbian Chemical Society, 66, 1, 27-37 (2001)
44. A.Buzarovska, S.Koseva, M. Cvetkovska, E. Nedkov, Poly(ethylene oxide) blends with poly(ethylene oxide)/poly(dicyclohexyl itaconate) block copolymers. European Polymer Journal, 37, 141-149 (2001)
45. M.Cvetkovska, S. Koseva, A.Buzarovska, B.Baysal, B. Yasar, O. Yilmaz, I. Popovic, L Katsikas, ABA type block copolymers of poly(monobutylitaconate) and poly(monocyclohexylitaconate) with poly(dimethylsiloxane): Synthesis and characterization. Macromolecular Chemistry and Physics 201, 6, 685-693 (2000)
46. M. Cvetkovska S.Koseva, A.Buzarovska, M.Lazarevic, B.Baysal, E. Hamurcu, N.Uyanik, Characteriation of polystyrene/polydimethyl- siloxane /polystyrene block copolymers obtained by various preparation procedures. Bulletin of the Chemists and Technologist of Macedonia, 15, 1, 15-22 (1996)
47. C.Silvestre, S.Cimmino, E.Di Pace, E.Martuschelli, M.Monaco, A.Buzarovska, S.Koseva, Morphology and Crystallization of isotactic polypropylene/poly(dicyclohexylitaconate) blends, Polymer Networks and Blends, 6, 2, 73-80 (1996)
48. S.Cimmino, E.Di Pace, E.Martuschelli, C.Silvestre, A.Buzarovska, S.Koseva, Phase structure, morphology and crystallization of poly(ethyleneoxide)/poly(dicyclohexylitaconate) blends, Polymer Networks and Blends, 5, 2, 63-68 (1995)
1. NATO SPS G5772 Portable chargers for soldiers-THOR (16.9.2020-16.9.2023)
2. BIOCOMP3DPRINT-12-AUF Obtention par impression 3D de biomatériaux composites aux propriétés antibactériennes (1.3.2019-1.9.2020)
3. BIOCOMPMAT-05-AUF Composite materials based on polymers and ceramic particles, with applications in tissue engineering and controlled drug delivery (2016-2017)
4. COST TU1207 Next Generation Design Guidelines for Composites in Construction (2013-2017)
5. Нанокомпозити од биоразградливи полимери и керамички полнители, Билатерален проект со Р. Словенија(2010-2012), главен истражувач
6.Биоразградливи полимерни смеси, МОН (2006-2009), главен истажувач
7.Eco-houses based on eco-friendly polymer construction composite materials (FP6, INCO-CT-2004-509185, раководител, Гордана Богоева Гацева(2004-2007)
8.COST-P12 Кристализација на полимерите: интегрирање на експерименталните и теоретските пристапи (2004-2007)
9.Примена на природни влакна како зајакнувачи во еколошки композити,МОН, раководител Анита Грозданов (2006-2009)
англиски
